Results 1 to 2 of 2

Thread: LS Mid-Rise Manifold Tests

  1. #1

    Default LS Mid-Rise Manifold Tests

    I'm building a LS1 and would like to use the new "mid rise" manifold but I haven't been able to find any good test results for the manifold. I would like to know how it compares in performance to a LS6 and FAST 92mm style manifolds. I think the mid-rise in a polished finish would have a killer look, but don't want to give up performance, especially in the 1,500 to 5,000 rpm range. This will be a street car, not a racer.....other then the normal "JUMP ON IT" type of enjoyment.
    Any feedback would be appreciated. 1969 Camaro, LS1, T56, Fab9 w/4.30 gears, 335/30R18 tires. Thank you!

  2. #2
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    17,623

    Default

    I don't know of any LSx "Mid-Rise" performance tests, but these articles are really good:
    http://www.streetlegaltv.com/feature...or-ls-engines/
    http://www.superchevy.com/technical/...o_new_heights/

    If you're after low-to-mid RPM LSx power, read the second to last paragraph:
    http://www.chevyhiperformance.com/te...r/viewall.html

    These are the LSx intake manifolds illustrated in the above article:
    http://www.holley.com/types/Chevrolet%20Gen%20III%20%28LS%29.asp

    Holley's "Mid-Rise" EFI intake manifold (dual-plane/EFI plenum):
    http://www.holley.com/300-126.asp
    May God's grace bless you in the Lord Jesus Christ.

    '78 BRONCO: 508" stroker, TFS heads, 11:1 comp ratio, Dominator MPFI & DIS, cold air induction, Spal dual 12" fans/aluminum radiator, dual 3" exhaust/Magnaflow mufflers, Moroso vacuum pump, Accusump, engine oil & trans fluid coolers, 100HP progressive dry direct-port NOS, A/C, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, traction bars, 4" Skyjacker lift, 35" mud tires

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us