Results 1 to 5 of 5

Thread: Liz Miles' 1968 Chevrolet Camaro

  1. #1
    milesspeed Guest

    Default Liz Miles' 1968 Chevrolet Camaro

    Hey guys!

    I wanted to share my pride and joy (one of them) with you! This is my '68 Camaro. I got it 10 years ago this July and have repaired, rebuilt, or replaced everything but the back and side glass. Recently I rebuilt my 350 with some new goodies inside and a 950 cfm Ultra HP on top. The car is setup for road racing and autocross, but really works well as a street car. This is one I'll NEVER sell!

    See more at

    -Gen 1 350 block
    -Forged crankshaft, stock rods and pistons
    -Dart Pro 1 aluminum heads
    -10.3:1 static compression ratio
    -Edelbrock Victor Jr. intake manifold
    -Comp Cams solid rollercamshaft (242°/244° duration at 0.050", .560"/.567" lift)
    -Crane 1.5:1 Gold race rockers
    -MSD ignition and Pro-Billet distributor
    -Holley Blue fuel pump
    -Holley 950 CFM HP carburetor
    -Edelbrock water pump
    -Flex-a-lite fans
    -Hedman headers

    This combination produced 501 hp at 6,600 rpm and 434 lb-ft at 4,900 on the Robello Racing dyno.

    -Muncie M-20 4-speed
    -McLeod's steel flywheel, 11-inch disc, and diaphragm pressure plate spin inside a Lakewood can
    -Original 10-bolt with Yukon axles, Eaton's Posi unit, and 3.73 Motive gears

    -Competition Engineering subframe connectors
    -QA1 single adjustable shocks
    -Year One quick ratio steering box
    -Hotchkis drop coils
    -Hotchkis front sway bar
    -Homemade rear sway bar
    -Hotchkis leaf springs
    -Energy Suspension bushings throughout
    -Brakes: Front, a pair of vented & slotted 11.75"x1.250" Wilwood rotors, Wilwood Dynolite calipers. Rear, Wilwood 12x0.800-inch rotors and four-piston calipers with integral mechanical parking brake.

    -Wheel Vintiques steel Rallyes, 15"x7" (front) and 15"x8" (rear).
    -Dunlop 8000-series 245/50-15s all the way around.

    Click image for larger version. 

Name:	hrdp_0612_04_z+1968_chevy_camaro+burnout.jpg 
Views:	471 
Size:	71.2 KB 
ID:	1185Click image for larger version. 

Name:	hrdp_0612_13_z+1968_chevy_camaro+driving_test.jpg 
Views:	424 
Size:	42.5 KB 
ID:	1186

    UPDATED: 5/27/15 by Alex Healey
    Last edited by Alex Healey; 05-27-2015 at 11:56 AM.

  2. #2
    rickyr Guest

    Default Sharp

    Nice setup. Glad to have you with us. Thanks.

  3. #3
    milesspeed Guest


    Thanks Ricky! She's my baby! I had to have her in storage the last month to work on my Mustang but she's home now. I missed her!

  4. #4
    Join Date
    Nov 2009
    Bowling Green, KY


    Nice. Thanks for posting.

  5. #5


    Really nice, love how clean & simple the engine bay is.
    '91 Mustang Notchback, daily driver/drag car. 306", 3000 lbs with me & full interior, Team-z upper/lower CA's, X pipe & MAC Pro Dumps, built AOD, Silverfox custom valve body, BTE custom 4000 stall, 4.56s, Trick Flow Track Heat heads, Track Max cam, 1.72 RR, ported rpm air-gap, Terminator EFI, 12 gallon fuel cell, Strange adjustable shocks, 4 cyl front springs, M/T 295/50/16 drag radials. 11.95@115

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us