Hi. I have an 03 IS300 and was looking into running dual coolers (for auto transmission and power steering) and have a few questions regarding what I need for fittings. The factory lines for the transmission and power steering is 3/8 inner diameter. Which fittings would I need in order to be able to adapt an AN fitting onto my factory hoses? Not familiar with the AN system of sizing hoses. What would be the most similar diameter for my factory 3/8 ID hose (-6AN or -4AN perhaps)? Thanks.
AN fitting onto factory 3/8 rubber hose
Collapse
X
-
Originally posted by cassius View PostWhich fittings would I need in order to be able to adapt an AN fitting onto my factory hoses?
http://www.holley.com/types/Hose%20B...20Adapters.asp (barb fittings)
http://www.holley.com/types/Aluminum...e%20Thread.asp (Ano-Tuff)
Then use a female NPT coupling to thread it to a -6AN fitting.
http://www.holley.com/991002ERL.asp (¼" NPT coupler)
http://www.holley.com/AT991002ERL.asp (Ano-Tuff)
http://www.holley.com/981606ERL.asp (-6AN/¼" NPT)
http://www.holley.com/AT981606ERL.asp (Ano-Tuff)
However, it would be simpler and easier to connect the -6AN fitting directly
onto the ⅜" metal line (thus eliminating the entire length of OEM rubber hose):
http://www.holley.com/165006ERL.asp
http://www.holley.com/AT165006ERL.asp (Ano-Tuff)
Or, if it's possible to remove the OEM transmission & power steering fittings,
Earl's might have a direct fit fitting. (You'll need to know the thread size.)
What would be the most similar diameter for my factory 3/8 ID hose (-6AN or -4AN perhaps)?
http://www.holley.com/data/TechServi...ad%20Sizes.pdf (AN sizes)May God's grace bless you in the Lord Jesus Christ.
'92 Ford Mustang GT: 385"/6.3L SBF, Dart SHP 8.2 block, Eagle 3.470" forged steel crankshaft & H-beam rods, Wiseco 4.200" forged pistons, Trick Flow Twisted Wedge 11R 205 CNC Comp Ported heads, 12:1 compression ratio, 232°-244° duration/.623" lift/114° LSA H/R camshaft, Trick Flow R-Series FTI Comp Ported intake, BBK 80mm throttle body, Holley Dominator MPFI & DIS, Holley 36-1 crank trigger, MSD 1x cam sync, PA PMGR starter, PA 200A 3G alternator, Optima 34/78 Red battery, 100HP progressive dry direct-port NOS, R134a A/C, Spal Dual 12" HP 3168 CFM fans, Frostbite 3-core aluminum radiator, Pypes SS dual 2.5" exhaust, SS off-road X-pipe, SS shorty headers, OEM smog pump converted vacuum pump, Earl's -6AN fuel system plumbing, Walbro 255 LPH in-tank pump & Pro-M -6AN hanger, S&W subframe connectors, BMR upper & lower torque box reinforcements, highly modified Ford 4R70W transmission, FTI 9.5"/3000 stall/triple disc TCC, B&M Hammer shifter, Stifflers trans crossmember & driveshaft safety loop, FPP aluminum driveshaft, FPP 3.73 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.
-
Comment