Results 1 to 3 of 3

Thread: Knock Control

  1. #1
    Join Date
    Jun 2013
    Location
    Calgary, Alberta
    Posts
    112

    Wink Knock Control

    With the GM small cap HEI (CCC), will the Terminator also control a knock sensor? Doesn't say it will, so probably not, but it would sure be a nice add on.

  2. #2
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    22,940

    Default

    Quote Originally Posted by 442SCOTTY View Post
    With the GM small cap HEI (CCC), will the Terminator also control a knock sensor?
    The Terminator EFI uses the same ECU as the Avenger/HP EFI, and it can be upgraded to an HP EFI by connecting a laptop computer (USB cable). So it is compatible with a knock sensor, because the HP EFI certainly is. Unfortunately, the Terminator EFI uses a much different main harness, and the knock sensor wire needs to be added to connect to pin A29 - Knock Input #1 (P1A ECU connector).
    https://www.holley.com/document/199r10653rev3.pdf (Terminator EFI Manual - figure 82, page 35)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  3. #3
    Join Date
    Jun 2013
    Location
    Calgary, Alberta
    Posts
    112

    Default

    Thanks for the reply! Awesome! I can do that.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us