Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: ECU bad

  1. #1
    928offroad Guest

    Default ECU bad

    Motor shut off after washing my windshield. Tested fuel pump, ignition, distributor, pour fuel down the throttle body and it runs for a few seconds. My ECU is marine grade, was new in 2003. What should I do?

  2. #2
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    23,108

    Default

    Quote Originally Posted by 928offroad View Post
    What should I do?
    Commander 950? If so, you can probably buy a used ECU.
    My opinion, upgrade to the new Holley HP EFI system.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  3. #3
    928offroad Guest

    Default

    What new parts does the upgrade consist of?

  4. #4
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    23,108

    Default

    Quote Originally Posted by 928offroad View Post
    What new parts does the upgrade consist of?
    Everything you see here. HP EFI ECU & Harness Kits:
    https://www.holley.com/products/fuel..._harness_kits/ (Select your application.)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  5. #5
    928offroad Guest

    Default

    Never going to believe this, but my son decided to try starting my Jeep and it started. Runs fine.
    Does the C950 use relays to protect it from shorts? My theory is a relay tripped because of moisture.

  6. #6
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    23,108

    Default

    Quote Originally Posted by 928offroad View Post
    Does the C950 use relays to protect it from shorts? My theory is a relay tripped because of moisture.
    I don't know of any such relay. You mean a circuit breaker? The C950 ECU hates electrical noise (EMI).
    Ensure there aren't any high voltage wiring or components near the C950 ECU or the EFI wire harness.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  7. #7
    928offroad Guest

    Default

    I assume high voltage wiring includes plug wires and components like a coil, distributor?

  8. #8
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    23,108

    Default

    Quote Originally Posted by 928offroad View Post
    I assume high voltage wiring includes plug wires and components like a coil, distributor?
    Yes, absolutely. Those components can't be in close proximity to the EFI harness or sensors.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  9. #9
    928offroad Guest

    Default

    What is too close, 6"?

  10. #10
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    23,108

    Default

    Quote Originally Posted by 928offroad View Post
    What is too close, 6"?
    Six inches is usually enough distance.
    http://forums.holley.com/showthread....6560#post16560 (similar post)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us