Results 1 to 4 of 4

Thread: Running existing electric fan with the 950

  1. #1
    MTCK Guest

    Default Running existing electric fan with the 950

    I've got an existing electric fan that is already wired with a relay and I have just installed the 700cfm TBI commander 950 system on my truck. I was wondering if I could tap into position C1 on the wiring harness and use my existing wiring and relay to let the C950 control the fan. Does that pin send 12v + when the computer calls for the fan? Also are there adjustable on and off temp settings?

    Thanks in advance.

    -Marcus

  2. #2
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    22,924

    Default

    Yes, wire it according to this diagram: http://www.holley.com/data/Products/.../199R10158.pdf

    The electric fan on-off settings are in the Input/Output screen (Output 2-C1), under Hdwr Settings.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  3. #3
    MTCK Guest

    Default

    Thanks, Danny. I'm sure this is just the beginning of my questions.

    -Marcus

  4. #4
    MTCK Guest

    Default

    Works like a champ - thank you. The one problem I had is I was looking for the C950 to provide 12v+ to the relay, when in fact it gives ground. The multimeter figured that out after a few minutes and it works flawlessly now. Thanks again.

    -Marcus

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us