Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: Hot Start, Long Cranking Time

  1. #11
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    31,512

    Default

    For others reading this, the Dual Sync distributor cam sensor should not be enabled (select "Not Used" in Custom Ignition Parameters) with TBI and distributor (single coil) ignition. The cam sensor is only for sequential fuel injection (MPFI) and/or coil-per-cylinder ignition (CNP, DIS, etc). The HyperSpark distributor doesn't have a cam sensor, so it's not an issue.

  2. #12
    Join Date
    Jan 2018
    Location
    SEVERN, Ontario
    Posts
    138

    Default

    Hey Danny, you're always on top of things. Thanks for all your input on this forum, much APPRECIATED!!! Joey.S

  3. #13
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    31,512

    Default

    You're welcome, and thanks for the compliment.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385"/6.3L SBF, Dart SHP 8.2 block, forged steel crank & rods, forged pistons, Trick Flow T/W 11R 205 CNC comp ported heads, 12:1 comp ratio, 232°-244° duration/.623" lift/114° LSA camshaft, TFS R-Series FTI comp ported intake, BBK 80mm T/B, Holley Dominator MPFI & DIS, Holley 36-1 crank trigger, MSD 1x cam sync, PA PMGR starter, PA 200A 3G alternator, Optima Red battery, 100HP progressive dry direct-port NOS, R134a A/C, Spal dual 12" fans, Frostbite 3-core aluminum radiator, Pypes dual 2.5" exhaust, off-road X-pipe, shorty headers, Earl's -6AN fuel system plumbing, Walbro 255 LPH in-tank pump & Pro-M -6AN hanger, S&W subframe connectors, BMR upper & lower torque box reinforcements, LenTech Strip Terminator wide-ratio AOD, 3000 RPM C6 converter, B&M Hammer shifter, Stifflers transmission crossmember & driveshaft safety loop, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

  4. #14

    Default

    After a few cold & warm starts with these settings, it works perfect!

  5. #15

    Default

    Thanks for the update. Glad it worked out for you.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us