Results 1 to 3 of 3

Thread: MSD Atomic TCM, TPS Span & Circuit Errors.

  1. #1

    Default MSD Atomic TCM, TPS Span & Circuit Errors.

    Rebuilt 4L60E with LQ4 engine, MSD ignition, FiTech EFI. FiTech EFI shows no issues with it's TPS, engine runs good. TPS calibration unsuccessful/fails. Atomic TCM shows TPS Span & Circuit Errors in control screen. In addition, on the TCM Dash and Gauges, TPS shows 100% at idle. Any ideas? Recommendations where I might look?

  2. #2

    Default

    With all the faults related to the TPS. I'd confirm the wiring is correct, make sure the TCM yellow wire is connected to the TPS signal wire, and not to the 5V supply which would show 100% all the time. Test the TCM circuit by jumping the TPS signal wire to the TPS ground wire, and see if the TPS reading drops to 0%. If it stays at 100% there's an open circuit.

  3. #3

    Default

    Thanks, I'll take a look.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us