Page 2 of 2 FirstFirst 12
Results 11 to 11 of 11

Thread: Help with Dome Boost Control

  1. #11


    Not that I'm aware of. When in doubt you can change up settings in your tune and use a different triggers to do what you want.
    for example.

    Make a output labeled "BC" and Enable it.
    Type needs to be Type - Ground

    click Configure

    Sensor Input Trigger can be TPS 10%.

    Go to Pin Map and move the Boost + Solenoid or Boost - Solenoid up to the unassigned section.

    Move your new "BC" output down and then send to ECU.

    Now when you get TPS above 10% it will activate that Output and you should hear your Solenoid click.
    Last edited by Rdf1; 05-15-2022 at 03:39 PM.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us