Results 1 to 6 of 6

Thread: A bit confused on the -AN fitting I need, and if it's even made.

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    davidc Guest

    Default A bit confused on the -AN fitting I need, and if it's even made.

    So, I bought an Accusump for my 03 Honda S2000 that I bring to the track. For those who don't know, it is essentially an oil reservoir of two quarts that is automatically pumped into the engine when oil pressure drops below a certain pressure. I lost two motors to oil starvation and I'm trying to avoid that in the future!

    It uses SS hose and -AN fittings.

    I need two -10AN to 1/2" NPT hose end fittings that are angled. But to be honest, Earls makes so many lines/types that I don't know if they make what I need and what model I should buy.

    I need 45, 90, 120, and 150 degree bend fittings. Unfortunately, the web site doesn't lend itself to easy look-up of these parts. Can anyone help?

    Here is a link to the installation kit I have from Canton Racing for the Accusump to use as a reference:
    http://www.accusump.com/

    Here is the description of the hose the kit comes with:
    This 1 foot -10 Stainless Steel Braided hose is a C.P.E. synthetic rubber tube bonded with a woven nylon braid and covered and secured with a 308 stainless steel outer braid. Made to resist extreme heat, abrasion and corrosion. Operating temperature is from -40 to +350 deg.. F. and can withstand working pressures up to 1000 PSI. For use with hydrocarbon and alcohol based fuels, motor oils, and coolant.

    And a description of the straight hose ends it comes with:
    This aluminum swivel straight hose end fits -10 hose onto 37 deg. female -10 AN fittings. It is for use with our stainless steel braided hose. It features one piece billet tube construction, viton o-rings, and blue and red coloring. The other end is 1/2" NPT.

    Last edited by davidc; 01-12-2013 at 07:39 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us