Results 1 to 2 of 2

Thread: Holley 12-803BP

  1. #1

    Default Holley 12-803BP

    Hello all. I'm pulling my Holley Sniper off and going back to a carb until I get some things sorted out. My question is: Will the Holley 12-803BP Bypass Regulator reduce pressure from the fuel pump that was used for the Sniper, which put out 60 psi. I need it regulated down to 7 psi. I do have a return to the fuel tank. Thanks, Larry

  2. #2
    Join Date
    Jan 2010
    Location
    Brisbane, Australia
    Posts
    2,119

    Default

    I used a modified Holley regulator to produce a bypass regulator, which you can buy now as the 803BP, and an EFI fuel pump.
    Carb was Holley 750DP, pressure was set at 6 psi. Gary

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us