Results 1 to 6 of 6

Thread: Pro Dash 553-111 controlling 5V analog switch.

  1. #1

    Default Pro Dash 553-111 controlling 5V analog switch.

    I have a Holley Pro Dash 12.3" 553-111 with a Holley Sniper EFI and an Aeromotive brushless Eliminator pump P/N 18051. I'm trying to control the variable speed pump with my Pro Dash. The pump requires an analog 0-5V signal from the TPS for the fuel pump to switch from low to high. 3.7 volts actually to switch from low to high speed, at WOT. The Holley Pro Dash does have a sensor reading for the TPS. I'm trying to determine if it's possible to program the dash to tell one of the output pins to give the 0-5V signal from the TPS, "In Analog only". A pulse modulated signal will not work. If so, what pin would I use and how do I program it? Thanks in advance.

  2. #2


    No analog outs unfortunately. Looks like you could install a remote mount TPS sensor to run it. Everything I've read about Sniper is to not split that TPS signal. Or if you Google PWM to analog converters you can pick up a board to do that for less than $10, then you could use PWM out to control it. But the remote TPS sensor seems easier to do.

  3. #3
    Join Date
    Dec 2009


    Use this: (Sniper EFI Dual TPS Unit) EDIT: Darn, the link is outdated/invalid. I notified the seller.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS T/W 11R 205 heads, 232°-244° duration/.623" lift/114° LSA camshaft, 12:1 C/R, TFS R-Series FTI ported intake, BBK 80mm T/B, Holley Dominator MPFI & DIS, 36-1 crank trigger, 1x cam sync, 200A 3G alternator, Optima Red battery, R134a A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans, Frostbite 3-core aluminum radiator, Pypes dual 2.5" exhaust, off-road X-pipe, shorty headers, -6AN fuel system plumbing, Walbro 255 LPH pump, S&W subframe connectors, BMR upper & lower torque box reinforcements, LenTech Strip Terminator wide-ratio AOD, 3000 RPM converter, B&M Hammer shifter, Stifflers trans crossmember & driveshaft safety loop, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

  4. #4


    I can't seem to find a remote TPS anywhere. If you know of where to find one any help would be appreciated. Otherwise, I may do the PWM out to control it. That will take some figuring out, but I understand the concept.

  5. #5


    I believe TCI makes a remote mount TPS. Andrew

  6. #6

    Default Possible Solution.

    I believe I found a good solution. I'll post once I've confirmed.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us