Headers & ExhaustAny mufflers fit well in my Camaro? I'm thinking about the Afterburner or Terminator, is that a good idea? Easily pass smog? Is this legal in CA?
'76 Camaro I6 4.1L Mufflers
Any mufflers fit well in my Camaro? I'm thinking about the Afterburner or Terminator, is that a good idea? Easily pass smog? Is this legal in CA?
Last edited by tikoal100; 12-15-2012 at 05:17 PM.
Administrator
Check the dimensions of those mufflers for possible fit.
There's no specific fit aftermarket mufflers for your Camaro.
You'll need to check the engine & exhaust modification legality in your state (DMV/DOT).
May God's grace bless you in the Lord Jesus Christ.
'92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS T/W 11R 205 heads, 232°-244° duration/.623" lift/114° LSA camshaft, 12:1 C/R, TFS R-Series FTI ported intake, BBK 80mm T/B, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 200A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, -6AN fuel system plumbing, Walbro 255 LPH pump, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, B&M Hammer shifter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.
Another question, can I install a x-pipe kit? Is there a universal one?
Administrator
Not on a single pipe exhaust system (dual exhaust only).
There are plenty of universal x-pipe kits available.
May God's grace bless you in the Lord Jesus Christ.
'92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS T/W 11R 205 heads, 232°-244° duration/.623" lift/114° LSA camshaft, 12:1 C/R, TFS R-Series FTI ported intake, BBK 80mm T/B, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 200A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, -6AN fuel system plumbing, Walbro 255 LPH pump, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, B&M Hammer shifter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.
I know, I wanna install a dual exhaust with x-pipe kit to get more power.
I want to get the Raptor muffler, is that a great idea?
Posting Permissions
Reply With Quote