Results 1 to 4 of 4

Thread: No start, no injector issue.

  1. #1

    Default No start, no injector issue.

    Having an issue with my Holley Dominator EFI. It's developed an issue. If shutting off while warming up the car, it won't restart. Holley cam & crank sensors with CNP. Car is on M5 with a Waterman cable drive. I've verified it has spark with a spark plug grounded. Unplugged the injector harness and the two red wires have +12V at crank. I tried a noid light and it does not light up. It will see cranking RPM with the laptop in live view. Where should I go from here troubleshooting? Thanks in advance.

  2. #2

    Default

    On my Dominator EFI setup, I have a fuel & oil pressure sensor that must have signal to start as well as over 400 RPM. Can you check if you have that?

  3. #3

    Default

    You need to start with the basics and confirm all of your wiring is in good shape, and everything is connected to where it should be. You can also run a System Log to check your cam and crank signals. You said this is an M5? BMW? What engine? Andrew
    IG @projectgattago
    I offer remote Holley EFI tuning.
    I deliver what EFI promises.
    Please get in touch if I can be of service.

  4. #4
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    27,483

    Default

    http://forums.holley.com/showthread....5760#post45760 (Scroll down to "Typical No-Start Checks".)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS T/W 11R 205 heads, 232°-244° duration/.623" lift/114° LSA camshaft, 12:1 C/R, TFS R-Series FTI ported intake, BBK 80mm T/B, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 200A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, -6AN fuel system plumbing, Walbro 255 LPH pump, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, B&M Hammer shifter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us