Hello. I have a 4L60E transmission that I just installed using the Dominator ECU to control. Things seem fine, but the issue that I'm having is that when the converter locks up, the RPM drops way more than I'd anticipate and the car shutters a bit. I raised the RPM value to 2200 and it still seems like it locks too aggressively. I plan on raising it to 2700, but I was wondering if this is normal or if there's another setting I should look at that would resolve this. I'm used to TCC Lockup only dropping RPM a few hundred, so this seems like I'm doing something wrong as it's dropping the RPM from 2100 to 1400-1500. Thank you, Sean