Results 1 to 4 of 4

Thread: Newbie Carb Problem

  1. #1

    Default Newbie Carb Problem

    We recently bought a 1966 Ford Mustang Restomod. It has a 302 with a QFT carb with electric choke. Not sure of the type probably, an SS-series. The problem that recently developed, is when the engine is started cold it starts fine, then as the choke opens the RPM builds to 2800 to 3000 and will not kick down. Stuck float? Float levels are good. I tried tapping on the carb. Any suggestions?

  2. #2
    Join Date
    Jan 2010
    Location
    Brisbane, Australia
    Posts
    1,977

    Default

    Is the red fast idle cam free to move up & down, since it's weighted to fall down, as the choke opens? Gary

  3. #3

    Default

    A float stuck open should flood as in fuel everywhere. I agree about the fast idle located on the choke adjustment side of the carb, sounds like it's sticking. Or if your throttle adjustment screw is turned in too far, the idle will be high when the choke opens. Also make sure there are no vacuum leaks causing a high idle when it's not choked. No need to tap with something bigger, joking.

  4. #4

    Default

    The fast idle cam is stuck.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us