Results 1 to 4 of 4

Thread: Battery Backup on Race car

  1. #1

    Default Battery Backup on Race car

    When running a race car with a battery disconnect, the ECU loses date & time when the battery is disconnected. I like having the datalogs date & time stamped and it's not always possible to grab the computer to resync the time after the power is turned on in the car. Not to mention the numerous times one of the crew turns off the power or it gets accidentally bumped.

    I'd like to wire up a 9V battery with a diode (to prevent it getting cooked from car power) to retain the memory. Would this work? I'd also put a diode on the main power line to the ECU to prevent the 9V from trying to power anything else in the car. Would this work or is there a better alternative?
    -Greg

  2. #2

    Default

    Wire the ECU's main power DIRECTLY to the battery (around the cutoff switch). That is legal and your issue will be solved. NEVER insert a diode in the ECU's main +V. You cannot tolerate the voltage drop across the diode.

    Also. First time you forget to close the switch and turn on the ignition you'd kill the 9V battery and potentially lose the tune. I would NOT DO IT.

    I have two COPOs, seven Super stockers, one pro-stock, and 50+ bracket guys with the main power wired to the battery around the switch. Never had an issue. NHRA tech just wants to make sure the engine will die if you kill the disconnect.
    Last edited by fastmanefi; 09-14-2020 at 05:11 PM.

  3. #3

    Default

    Thank you!

  4. #4

    Default

    You're welcome. It'll be fine.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us