Results 1 to 4 of 4

Thread: Terminator X Max Injector Harness

  1. #1

    Default Terminator X Max Injector Harness

    I have a 550-917, the injector harness is for truck injectors, I need one for EV1s. Would Holley swap it for me (it's new). If not, are there EV1 ends available? Thank you.

  2. #2
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    26,710

    Default

    Contact Holley Tech Service (LINK).
    https://forums.holley.com/showthread...2071#post52071 (Related Forum Post)
    https://forums.holley.com/showthread...5100#post85100 (Related Forum Post)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS T/W 11R 205 heads, 232°-244° duration/.623" lift/114° LSA camshaft, 12:1 C/R, TFS R-Series FTI ported intake, BBK 80mm T/B, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 200A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, -6AN fuel system plumbing, Walbro 255 LPH pump, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, B&M Hammer shifter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

  3. #3

    Default

    @jimbo72: You should try to get Holley to swap it out because the Terminator X injector harness is a little on the short side already and if you cut the harness and install new connectors, it might be too short. You can also build a harness pretty easily. Andrew
    https://www.painlessperformance.com/wc/60130

  4. #4

    Default

    Thanks guys. Swapping is my first choice. Actually seems my harness cost more than the EV1, just looking for an even swap. With the COVID19, probably harder to get someone at Holley.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us