Results 1 to 7 of 7

Thread: 7" Digital Dash: Datalog & tuning buttons missing.

  1. #1

    Default 7" Digital Dash: Datalog & tuning buttons missing.

    I have a 7" Digital Dash hooked up to a Terminator X. The datalog & tuning buttons aren't showing. I'm not sure how I tell what version my dash is, and what firmware version to update it too. Please help not good with the tech stuff.

  2. #2
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    26,973

    Default

    The EFI (laptop/PC) software, ECU firmware & touchscreen unit must all be version compatible (LINK). Also ensure the the Digital Dash was updated with the Terminator X firmware, not the regular Terminator EFI firmware.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS T/W 11R 205 heads, 232°-244° duration/.623" lift/114° LSA camshaft, 12:1 C/R, TFS R-Series FTI ported intake, BBK 80mm T/B, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 200A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, -6AN fuel system plumbing, Walbro 255 LPH pump, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, B&M Hammer shifter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

  3. #3

    Default

    Thanks for reply, but I'm still confused. My controller info states I have firmware version 1.0 Build 130. Dash warning bottom left of screen says, "Firmware mismatch. EFI V 1.0, Dash V 2.0". That's pretty clear, but I'm not 100% sure which firmware upgrade to use, out of the options for Terminator X.

  4. #4
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    26,973

    Default

    If your Terminator X ECU firmware is V1, then download the 7" Dash Firmware for Terminator X V1 (LINK).
    If your Terminator X ECU firmware is V2, then download the 7" Dash Firmware for Terminator X V2 (LINK).

    EFI Software & ECU Firmware Versions:
    EFI SOFTWARE: Click "Help" tab (top toolbar) & "About Holley Terminator X EFI".
    ECU FIRMWARE: Click "Sync With ECU" & "Get ECU Info" (Key-on/USB connected).
    The latest EFI software & ECU firmware can be downloaded here:
    https://www.holley.com/support/resou...Fuel_Injection (Holley EFI Technical Library)
    http://documents.holley.com/techlibr...rmwarerev1.pdf (How To Update ECU Firmware)
    Before updating firmware, ensure the current Global File is saved somewhere, since it will be erased from the ECU.
    The EFI (laptop/PC) software, ECU firmware & touchscreen unit must all be version compatible (LINK).
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS T/W 11R 205 heads, 232°-244° duration/.623" lift/114° LSA camshaft, 12:1 C/R, TFS R-Series FTI ported intake, BBK 80mm T/B, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 200A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, -6AN fuel system plumbing, Walbro 255 LPH pump, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, B&M Hammer shifter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

  5. #5

    Default

    I'm fairly certain that tuning is not an option with the Terminator X ECU through the 7" Digital Dash. That's only for the Dominator and HP ECUs that use the "regular" EFI software. Andrew

  6. #6

    Default

    Thanks Andrew. That's probably a safe thing for me, but I really want the datalog feature. I had a driving car with no Digital Dash. After attempting this firmware update several times all I got is an empty SD card, a big mess of files in my laptop and no tune in my Terminator X. Totally dejected.

  7. #7

    Default

    Did you get this sorted out? I had a similar problem when I upgraded to the 7” Digital Dash.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us