Results 1 to 2 of 2

Thread: Selecting right carb - 440 Mopar.

  1. #1

    Default Selecting right carb - 440 Mopar.

    Hello all. I have a 446 CI big block Mopar in a 4 speed Coronet. I have a 3.73 gear with a 28” tall tire on the car. Car weighs around 3600
    The engine is:
    -9.5:1 compression
    -Holley Street Dominator intake
    -Pertronix ignition 20° base, 34° all in.
    -Ported 906 iron heads that flow 295 on the intake. 2.14” valve
    -Cam is 234°, 240° @ .050 .530" lift on a 109° LSA.
    -Vacuum in 10” to 12” at idle

    I use the car as a street car with an occasional trip to the strip.

    I’m considering an HP 80511-1, 830 CFM with annular boosters.
    The intake heat crossover is blocked.
    I thought the annular boosters would help the low end and the 830 would still give me good top end. Does that sound like a good choice? Thanks.

  2. #2
    Join Date
    Jan 2010
    Location
    Brisbane, Australia
    Posts
    1,977

    Default

    Yes, that sounds like a good choice. Gary

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us