Results 1 to 3 of 3

Thread: HyperSpark CD Ignition Box 12-Pin Connector

  1. #1

    Default HyperSpark CD Ignition Box 12-Pin Connector

    I'm installing a Terminator Stealth system with a HyperSpark distributor and HyperSpark CD Ignition box.

    The location of the HyperSpark CD box requires that I lengthen the red & black power leads. I want to replace the existing wires with the correct length wire rather than splice wire to the existing leads.

    I haven't found any information about the pins inside the large/main 12-pin connector. I do see there are two sizes of pins inside the connector. Does anyone know the connector part number and the two sizes of pins? Thanks, Andrew
    I've attached a copy of the connector in question.
    Click image for larger version. 

Name:	556-151_0418143.jpg 
Views:	5 
Size:	46.8 KB 
ID:	10268

  2. #2


    The connector is a Metri-Pack GT hybrid. It uses 150 & 280 GT terminals, not to be confused with the regular Metri-Pack terminals. You can reuse the connector body and just source the terminals from Mouser or WaytekWire. Andrew

  3. #3


    Thanks for your help Andrew.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us