Results 1 to 3 of 3

Thread: Terminator X Fox Body Kit.

  1. #1

    Default Terminator X Fox Body Kit.

    I installed the system, the car started, but was running very rough and doing little popping noises through the exhaust. I got my temp gun out and it appears cylinders #7 & #8 are not firing. Everything is brand new, this is on startup for the first time 60 lb/hr Siemens Deka injectors. Verified I'm getting spark and I tested the Ohms on the injectors, they're 12.5 Ohms like Siemens says. I wiggled the plugs on cylinders #7 & #8 to make sure they had good connection and they were on. I've had the kids since January and just got around to installing it. I just did a firmware update, don't know if that has anything to do with it. I just don't want to put the upper intake back on if I have other problems. Any advice?

  2. #2
    Join Date
    Dec 2009


    If it's a Ford TFI distributor, ensure it has a genuine Ford Motorcraft TFI ignition module installed. Also, ensure the ignition timing is synchronized with the ECU. (Related Forum Post)

  3. #3


    OK, thank you.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us