Results 1 to 4 of 4

Thread: Street Avenger: Replace fuel bowl brass sight plugs with sight windows?

  1. #1

    Default Street Avenger: Replace fuel bowl brass sight plugs with sight windows?

    Howdy. I'm buying a Street Avenger 670 from my friend. That carburetor don't have sight windows, just those brass plugs and I'd like to have windows version. Can I change those brass plugs to sight windows afterward? If that can be done, I'm planning to do that before I install the carburetor on my engine.

    I found these sight windows. Are these working on Street Avenger
    FUEL BOWL SIGHT WINDOW KIT SERVICE PART Fuel Bowl Sight Window kit (For Fuel Bowls 34-37 & 34-38) PART# 26-112
    https://www.holley.com/products/fuel...s/parts/26-112. Best regards, Isto
    Last edited by IstoT; 08-07-2020 at 12:02 AM.

  2. #2
    Join Date
    Jan 2010
    Location
    Brisbane, Australia
    Posts
    1,940

    Default

    That's not a screw-in for in place of the early level plugs. You could have your bowls machined for that sight gl**** but if might be easier to go for an off-the-shelf conversion like this:
    https://www.holley.com/products/fuel.../parts/134-71S. Gary

  3. #3

    Default

    Thanks Gary. Seems that it was not so easy as I thought, so should be better stick on brass plugs. Someday when I do repair, then I could made this. I understand that you don't need to change fuel level so often that it won't bother too much.

  4. #4
    Join Date
    Jan 2010
    Location
    Brisbane, Australia
    Posts
    1,940

    Default

    Yes, that's correct. I mark one flat on the adjusting nut. Once the float level is correct, you can wind it up or down a flat at a time without removing the plugs.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us