Hey Everyone! I'm using a LM7 from a 2003 Chevy 1500 topped with an LSA blower. Crank is 24x with a 1x cam. The 5.3L is backed with a 4L80E and all of it is being controlled by the Terminator X Max. I'm running stock LSA injectors that FIC has reworked to 1000 CCs (put into the tune as FIC1000). The truck is also DBW using ACDelco 12629992 (LSA) throttle body and 10379038 ACDelco pedal.
The truck starts up fine and idles fine, but won't go above 2K RPM, nor over 10% throttle position no matter what the actual pedal position is. It's almost like it has some sort of limiter in place. I looked into the DBW safeties, but I can't figure out what the issue is.
I've attached the datalog and tune files for more info.
The truck starts up fine and idles fine, but won't go above 2K RPM, nor over 10% throttle position no matter what the actual pedal position is. It's almost like it has some sort of limiter in place. I looked into the DBW safeties, but I can't figure out what the issue is.
I've attached the datalog and tune files for more info.
Comment