Results 1 to 1 of 1

Thread: Grid With 7764 Power Module

  1. #1
    Join Date
    Mar 2016

    Question Grid With 7764 Power Module

    I'm using the 7764 to control the nitrous solenoids. Do I need to use only the input wires to activate the timing retard? Or do I still need to have the step wire on the Grid activated to send signal to the input wires on the Power Module? I'd also like to know a suggestion on Frequency Hertz settings. Defaults are 10 on A and 1000 on B. I know most solenoids operate at 10-30 Hertz, should I set those frequencies to 10 on A and 30 on B?
    Last edited by TVHRacing; 06-28-2020 at 12:50 AM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us