Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: Digital 6AL stalls, but always restarts.

  1. #11

    Default

    The magnetic pickup can be tested with your multimeter using the AC voltage setting and should produce around 4 volts spinning the distributor shaft quickly by hand, a heat gun can be used if you suspect a heat related issue. You could also test the coil output with an adjustable spark tester, a minimum of 30 kV should be produced. Also, the heat gun could be used to heat the CDI box during the test.

  2. #12

    Default

    Monday I replaced the magnetic pickup and took it out for a drive for a while, no issues.

    Last night we drove into the city for a cruise around, about a three hour round trip, and it shut off once in slow traffic, much better than before, but still frustrating.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us