Results 1 to 8 of 8

Thread: 3.5" TSLCD Communication Cable

  1. #1

    Default 3.5" TSLCD Communication Cable

    Can anyone give me a part number to the cable to connect the 3.5" TSLCD display?

  2. #2
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    25,626

    Default

    It depends on which generation EFI main harness you have:
    https://www.holley.com/products/fuel.../parts/558-430 (Holley 558-430 CAN Bus Adapter)
    https://www.holley.com/products/fuel.../parts/558-445 (Holley 558-445 CAN Bus Adapter)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS T/W 11R 205 heads, 232°-244° duration/.623" lift/114° LSA camshaft, 12:1 C/R, TFS R-Series FTI ported intake, BBK 80mm T/B, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 200A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, -6AN fuel system plumbing, Walbro 255 LPH pump, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, B&M Hammer shifter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

  3. #3

    Default

    This is the connector on the display.
    Name:  3.5 connect.PNG
Views: 29
Size:  11.4 KB

  4. #4
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    25,626

    Default

    It's the EFI main harness that matters.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS T/W 11R 205 heads, 232°-244° duration/.623" lift/114° LSA camshaft, 12:1 C/R, TFS R-Series FTI ported intake, BBK 80mm T/B, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 200A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, -6AN fuel system plumbing, Walbro 255 LPH pump, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, B&M Hammer shifter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

  5. #5

    Default

    Click image for larger version. 

Name:	can 2.jpg 
Views:	12 
Size:	10.6 KB 
ID:	9893
    I need this I think. The adapter between CAN1 and the 3.5" TSLCD.

  6. #6

    Default

    I may have posted the incorrect question. I have a CAN (female) connector off the harness and a double CAN (female) off the handheld. I'm assuming I need a double male CAN wire to connect?
    Last edited by Jkydd; 06-05-2020 at 05:02 PM.

  7. #7
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    25,626

    Default

    No, that double connector is for connecting a second touchscreen unit. For example, I use the second connector for a Digital Dash unit.

    The dual 4-pin Molex Mizu-P25 connector, easily allows multiple Holley EFI devices to be connected onto the CAN1 Bus/power circuit.
    One Holley EFI device connects to Switched +12V, Ground & CAN Bus (LINK), and the next device simply plugs into its dual connector.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS T/W 11R 205 heads, 232°-244° duration/.623" lift/114° LSA camshaft, 12:1 C/R, TFS R-Series FTI ported intake, BBK 80mm T/B, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 200A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, -6AN fuel system plumbing, Walbro 255 LPH pump, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, B&M Hammer shifter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

  8. #8

    Default

    I was thinking single male on each end to connect? Im going based off the picture above. I know one side of that double female isnt used on the display side. I was thinking part number 558-428 may be what I need?
    Last edited by Jkydd; 06-05-2020 at 05:32 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us