Results 1 to 3 of 3

Thread: EFI Fuel Line

  1. #1

    Default EFI Fuel Line

    Ordered my Sniper Kit as well as a Tanks Inc. GPA 2. It'll be on a '74 Dodge Stepside. I’m at the point of determining how much fuel & return line I’m going to need. I plan on using nylon braided long with -6AN fittings. Anyone here recently do a short bed Dodge or maybe a C10?

  2. #2

    Default

    There's no reason to run expensive PTFE hose the whole length of the truck. I prefer using inexpensive NiCopp 3/8" hardline for the long runs and using short sections of hose where flexibility is needed. The NiCopp line flares beautifully and mates easily to AN fittings by using a proper flare tool, tube nuts, and AN union fittings. Check out this video:
    IG @projectgattago
    I offer remote Holley EFI tuning.
    I deliver what EFI promises.
    Please get in touch if I can be of service.

  3. #3
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    26,710

    Default

    I used Earl's Speed Flex -6AN stainless steel braided PTFE hose & Speed Seal fittings (to replace the OEM body supply & return fuel lines) on my last two vehicles. I find it much easier to route and work with under the vehicle, due to its flexibility.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS T/W 11R 205 heads, 232°-244° duration/.623" lift/114° LSA camshaft, 12:1 C/R, TFS R-Series FTI ported intake, BBK 80mm T/B, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 200A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, -6AN fuel system plumbing, Walbro 255 LPH pump, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, B&M Hammer shifter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us