Results 1 to 3 of 3

Thread: Terminator throttle body o-ring?

  1. #1

    Default Terminator throttle body o-ring?

    Is the Terminator throttle body supposed to have an o-ring between the back of the TPS sensor and the boss that the primary throttle shaft fits through? I've been chasing a vacuum leak. Did a smoke test and found small leaks around linkage side of both throttle shafts. Found a bigger leak coming out from behind the TPS sensor. Removed the TPS and there was no o-ring. Was told by a knowledgeable person that it's supposed to have an o-ring. Holley Tech said that an o-ring does NOT go there. There's a nice chamfer like it's made for an o-ring. But mine didn't have one. What gives?

  2. #2

    Default

    I did a smoke test on mine long ago also and found no o-ring. The way the throttle body is machined at the bottom it wouldn't matter if there were, as it wouldn't seal. The TPS on GM models does have the o-ring, as you're thinking. The small amount of leak seen with the smoke won't matter enough to cause any issues.

  3. #3

    Default

    The primary source of my air/vacuum leak was the IAC. It wasn't closing all the way.

    However, I tried a 3/8" x 1/16" o-ring and a 3/8" x 3/32" o-ring between the TPS and the throttle shaft boss. The 3/32" cross-section o-ring completely sealed the leakage past the throttle shaft. Probably not a bad idea. Can't hurt. It does work.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us