Results 1 to 4 of 4

Thread: Sniper 4150 to Racepak IQ3S Bus Interface Question

  1. #1

    Default Sniper 4150 to Racepak IQ3S Bus Interface Question

    I've purchased a new Sniper 4150 with Sniper coil and distributor for my Ford 347. I'm having difficulty figuring out where to connect to the Racepak IQ3S. Upon installation, Racepak recommended purchasing adapter 280-CA-EFIHOL. I have laid out the wiring and still can't figure out where the adapter cable connects to the CAN Bus on the Sniper. I just see the cable that leave the Sniper to the handheld 3.5" TSLCD. What am I missing?

  2. #2
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    25,101

    Default

    Contact Racepak Tech Service (LINK).
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS T/W 11R 205 heads, 232°-244° duration/.623" lift/114° LSA camshaft, 12:1 C/R, TFS R-Series FTI ported intake, BBK 80mm T/B, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 200A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, -6AN fuel system plumbing, Walbro 255 LPH pump, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, B&M Hammer shifter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

  3. #3

    Default

    Are all of the Holley tech numbers closed due to the COVID19?

  4. #4
    Join Date
    May 2019
    Location
    Nixa, MO
    Posts
    29

    Default

    Following! I just purchased a Sniper for my 427 SBC and want to use the IQ3 Street Dash, but can't find where it’s compatible.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us