Results 1 to 3 of 3

Thread: Fuel Level With Digital Dash

  1. #1

    Default Fuel Level With Digital Dash

    I need help setting up the I/O Adapter harness for the 7" Digital Dash. I'd like to monitor fuel level and transmission temperature on the new 7" Digital Dash I purchased. I have the Holley Terminator X installed on my 5.3L swap and the engine is running and the Terminator X was setup remotely by a tuner who has went out of business since the install, so I don't have him as a resource anymore. He saved the tune on my Terminator X program on my laptop. I got as far as getting the I/O icon uploaded to the tool bar and now I don't know where or which pin to assign the fuel level to. I looked through the I/O Adapter harness directions and it looks like the fuel level should be I/O 10, pin 13. How do you know on the program page where to assign those and what to do from there? Any help would be greatly appreciated. Thanks, Chris

  2. #2
    Join Date
    Dec 2009


    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS T/W 11R 205 heads, 232°-244° duration/.623" lift/114° LSA camshaft, 12:1 C/R, TFS R-Series FTI ported intake, BBK 80mm T/B, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 200A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, -6AN fuel system plumbing, Walbro 255 LPH pump, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, B&M Hammer shifter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

  3. #3


    I just finished setting mine up. You have to create a Custom Ohms in your dash. Need to know what Ohms your sender is empty and full, then setup the table in 16 different settings. It’s quite easy once you get started.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us