Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Trouble with Traction Control activation.

  1. #1

    Default Trouble with Traction Control activation.

    So here's the issue. When I activate the transbrake the Traction Control starts its timer, not when I release the transbrake. I can't find any info to figure this out. Any suggestion would be greatly appreciated. Thanks for helping!
    camaro 68 twin e85 rescale.zip

  2. #2

    Default

    Sounds like you have already figured it out. It starts when it gets a signal from the transbrake, but you want it to start when the signal goes away.

  3. #3

    Default

    Yes. That's where I can't figure out how to do that.
    Last edited by lballog; 03-21-2020 at 09:19 PM.

  4. #4

    Default

    You have the "TC Enable" pinned to the transbrake. You can remove that. You only need "TC Launch Input" pinned to your transbrake. You can remove "TC Enable" altogether unless you want to do a separate switch that enables it.

  5. #5
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    24,097

    Default

    https://forums.holley.com/showthread...234#post109234 (Additional Information - "At Input Release" functions.)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 232°-244° duration/.623" lift/114° LSA camshaft, 11.8:1 comp, TFS R-Series FTI ported intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 200A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 MT tires.

  6. #6

    Default

    OK cool. Thank you. That's in V5 Build 160. I'm updating it right now.

  7. #7
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    24,097

    Default

    Yes, the latest EFI software/ECU firmware versions always contain all preceding updates.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 232°-244° duration/.623" lift/114° LSA camshaft, 11.8:1 comp, TFS R-Series FTI ported intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 200A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 MT tires.

  8. #8

    Default

    OK I must be missing something. I've been trying to figure this out for six hours now and nothing is working. The instructions show you kind of how to find the At Input Release. I've read it numerous times. Do I have to run some kind of jumper wire or relay with the AT Input Release?

  9. #9
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    24,097

    Default

    Did you try Allan's suggestion in post #4?
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 232°-244° duration/.623" lift/114° LSA camshaft, 11.8:1 comp, TFS R-Series FTI ported intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 200A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 MT tires.

  10. #10

    Default

    Yes, I removed both of them from the Pin Map. I tried a bunch of different ways. It still activates when the transbrake is activated. This is the file: red car 3-22.zip

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us