Results 1 to 5 of 5

Thread: Flathead MSD 6A

  1. #1

    Default Flathead MSD 6A

    Is this expected wear for the cap & rotor terminals? Seems excessive to me. Thanks for any information. PJ
    https://www.jalopyjournal.com/forum/...3-jpg.4602680/
    https://www.jalopyjournal.com/forum/...4-jpg.4602681/
    https://www.jalopyjournal.com/forum/...5-jpg.4602682/

  2. #2

    Default

    Awaiting response. Thank you.

  3. #3
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    25,514

    Default

    No, check rotor-phasing. Ensure you're using the correct Ignition Reference Angle for your distributor (inherent crank reference angle/rotor-phasing of the distributor). Rotor-phasing will be way off if it's wrong.
    http://www.masterenginetuner.com/top...all-fails.html (Crank Reference Angle Importance)

    Originally Posted by Danny Cabral
    Testing the MSD CD ignition box.
    Points Output - white wire & Magnetic Pickup - violet/green triggering:
    https://www.msdperformance.com/suppo...ng_techniques/ (Troubleshooting Info)

    Ensure the distributor's rotor-phasing is correct:
    http://documents.msdperformance.com/8644_tb.pdf (MSD Rotor-Phasing Document)
    MSD has a good video on why it's important:
    http://www.youtube.com/watch?v=aWMlNwGW0tM (MSD Tech Rotor-Phasing Video)

    For naturally aspirated engines, the rotor is usually phased halfway between minimum & maximum amount of timing advance used.
    For forced induction engines, the rotor is usually phased at maximum boost retard, because that's when cylinder pressure is the greatest.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS T/W 11R 205 heads, 232°-244° duration/.623" lift/114° LSA camshaft, 12:1 C/R, TFS R-Series FTI ported intake, BBK 80mm T/B, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 200A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, -6AN fuel system plumbing, Walbro 255 LPH pump, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, B&M Hammer shifter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

  4. #4

    Default

    Thank you for the information. I will look into this.

  5. #5
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    25,514

    Default

    You're welcome.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS T/W 11R 205 heads, 232°-244° duration/.623" lift/114° LSA camshaft, 12:1 C/R, TFS R-Series FTI ported intake, BBK 80mm T/B, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 200A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, -6AN fuel system plumbing, Walbro 255 LPH pump, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, B&M Hammer shifter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us