Results 1 to 3 of 3

Thread: Intake Manifold - Notching Plenum Divider?

  1. #1

    Default Intake Manifold - Notching Plenum Divider?

    '72 Corvette 454 BBC. Edelbrock Performer 2.0 intake manifold (dual-plane).

    Installed new Atomic system a couple of months ago and so far it's been running great. No codes are showing. Although I haven't had it out very much, due to bad weather, I have noticed a slight surging happening at cruising speed. My question relates to the intake manifold. I'm led to believe that "notching" the plenum divider of the manifold could help alleviate with this surging. Yes/no? Is it worth doing? Note: I can't use a spacer because of tight hood clearance.

  2. #2
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    24,087

    Default

    Quote Originally Posted by Kim72 View Post
    Note: I can't use a spacer because of tight hood clearance.
    Then you're taking a risk without testing the theory with an open spacer. Maybe remove the hood for testing, but if it ran fine with a carburetor (& same intake manifold), then it should run fine with TBI. Meaning it could be a tuning issue.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 232°-244° duration/.623" lift/114° LSA camshaft, 11.8:1 comp, TFS R-Series FTI ported intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 200A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 MT tires.

  3. #3

    Default

    Thanks for the reply. Yes, you're definitely right, I'd be taking a chance if I went ahead and cut a notch. I'm hoping to hear from anyone who has experience with this. I plan on seeing if the system will Learn itself some more when I can get some good cruising miles on it. Until then, I don't plan on doing anything rash. Just considering it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us