Results 1 to 2 of 2

Thread: 6AL-2 Programmable + 6/71 + Nitrous

  1. #1

    Default 6AL-2 Programmable + 6/71 + Nitrous

    Setting up a 6AL-2 programmable on a blown SBC with 100 shot of nitrous. Is there a way I can setup the boost curve and a curve for the nitrous when it's engaged? Can I use the pink wire for this purpose?

  2. #2
    Join Date
    Jan 2010
    Location
    Brisbane, Australia
    Posts
    1,662

    Default

    You're need to set your advance curve on the run retard curve. The boost retard curve is relative to manifold pressure.
    Unless you wish to have "vacuum advance" the boost curve is of no use in this case.
    Use the pink wire to retard the whole curve by "X" amount of degrees when the nitrous is activated.
    Page 12 of the 6530 instructions. Gary
    Regards, Gary

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us