Results 1 to 2 of 2

Thread: Setting Cam Sync - HELP!

  1. #1

    Default Setting Cam Sync - HELP!

    Guys. I need some advise. Apparently, I've set my cam sync 180° out, as when I check it with a timing light is flashing at 180-190°. Here's my mental problem. When I set it up, I put @ TDC with the intake valve opening (which is obviously wrong). Then I backed it back to 190° BTDC and set my Cam Sync. So to my ignorant way of thinking, I should be able to put @ TDC (with the intake opening), roll it over 360°, then back it to 190° and it would then be correct? Please help this idiot!

  2. #2
    Join Date
    Dec 2009

    Default (Crank & Cam Sensor Setup)
    There's an updated version of "Crank & Cam Sensor Setup" in the Holley EFI software. On the top Toolbar, click "Help" & "Contents". It's listed in the Help topics.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS T/W 11R 205 heads, 232°-244° duration/.623" lift/114° LSA camshaft, 12:1 C/R, TFS R-Series FTI ported intake, BBK 80mm T/B, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 200A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, -6AN fuel system plumbing, Walbro 255 LPH pump, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, B&M Hammer shifter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us