Results 1 to 4 of 4

Thread: CAN Hook Up

  1. #1

    Default CAN Hook Up

    So If I'm using a Racepak IQ3 Dash and the Holley 6.86" Pro Dash in my vehicle, can I just use the existing CAN plug on the LS1 Dominator harness and daisy chain them both. Or do I need to use the 558-412 CAN kit and take those pins out and populate the correct J3 plug inputs for one and the LS1 harness CAN plug for the other? Thanks in advance for the input.

  2. #2

    Default

    You'll need to use both CAN networks. In the software, you'll need to set one to Holley and one to Racepak. You can daisy chain multiple Holley can items on 1 network, but the Racepak stuff uses a different protocol.

  3. #3

    Default

    Great, thank you for the info.

  4. #4
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    24,169

    Default

    There are two CAN Bus #1 & #2 Types in Basic I/O (System ICF). One will be set to "Holley Standard", and the other "Racepak". Change the appropriate protocol channels to "Holley Standard" & "Racepak".
    CAN Bus 1 Type: ECU pins J1-A32 (High) & J1-A24 (Low).
    CAN Bus 2 Type: ECU pins J3-B20 (High) & J3-B14 (Low).
    http://documents.holley.com/techlibr...10555rev17.pdf (Holley EFI Wiring Manual - Pages 6 & 8)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 232°-244° duration/.623" lift/114° LSA camshaft, 11.8:1 comp, TFS R-Series FTI ported intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 200A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 MT tires.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us