Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: C950 Software Issue

  1. #1

    Default C950 Software Issue

    I have an old C950 I picked up really cheap, I was told it works. The problem is from everything I can tell it has never had the firmware updated. I'll buy the wideband kit and have it updated to Pro, IF I CAN verify it works.

    I don't have much money in this, I'd hate to invest more into a dead ECU, so where can I download the V1.02, and other software versions? If it works, I'll pay for the Pro version and firmware update.

    The back of it has a label:
    209R514-1 1141
    240°00

    That's all. It came with a GM TPI harness. The wiring looks good and all checks out.
    Last edited by Bill C; 01-15-2020 at 03:40 AM.

  2. #2
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    26,757

    Default

    Quote Originally Posted by Bill C View Post
    ...so where can I download the V1.02, and other software versions?
    Contact Holley Tech Service (LINK). Their Holley EFI Technical Library webpage below only list the Pro version.
    http://www.holley.com/support/resources/#Fuel_Injection (Holley EFI Technical Library)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS T/W 11R 205 heads, 232°-244° duration/.623" lift/114° LSA camshaft, 12:1 C/R, TFS R-Series FTI ported intake, BBK 80mm T/B, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 200A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, -6AN fuel system plumbing, Walbro 255 LPH pump, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, B&M Hammer shifter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

  3. #3

    Default

    OK, got it fired up, ECU version 1.1. Can you say ANCIENT! Hehehe.

    Now, I have the 534-188 wideband I picked up today at local speed shop. I have the update certificate, should I contact Holley first or just box it up and send it?

  4. #4
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    26,757

    Default

    I'd call first, since the C950 is an obsolete EFI system.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS T/W 11R 205 heads, 232°-244° duration/.623" lift/114° LSA camshaft, 12:1 C/R, TFS R-Series FTI ported intake, BBK 80mm T/B, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 200A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, -6AN fuel system plumbing, Walbro 255 LPH pump, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, B&M Hammer shifter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

  5. #5

    Default

    Got a number specific to the EFI/Tech upgrade department?

  6. #6
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    26,757

    Default

    Contact Holley Tech Service (LINK).
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS T/W 11R 205 heads, 232°-244° duration/.623" lift/114° LSA camshaft, 12:1 C/R, TFS R-Series FTI ported intake, BBK 80mm T/B, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 200A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, -6AN fuel system plumbing, Walbro 255 LPH pump, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, B&M Hammer shifter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

  7. #7

    Default

    Quote Originally Posted by Danny Cabral View Post
    I'd call first, since the C950 is an obsolete EFI system.
    Their dealers still have the wideband and software for sale and they still charge you an astronomical price because it includes the upgrade certificate. So surely they would either honor that, or buy back all the stock from their dealers?

  8. #8
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    26,757

    Default

    I agree, but I'd confirm that by calling first. I haven't dealt with the Commander 950 Pro EFI in over ten years.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS T/W 11R 205 heads, 232°-244° duration/.623" lift/114° LSA camshaft, 12:1 C/R, TFS R-Series FTI ported intake, BBK 80mm T/B, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 200A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, -6AN fuel system plumbing, Walbro 255 LPH pump, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, B&M Hammer shifter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

  9. #9

    Default

    Cause if not I just got taken for a ride and will be getting a refund. I bought the 534-188 brand new unopened box from an authorized Holley dealer, he gave me a very decent price for it, but it's worthless if they will not update the firmware. And I was very specific with the questions I asked, because I did look and see that Holley discontinued production of the C950 stuff, but there's still a lot of it out there. New and unsold.

  10. #10
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    26,757

    Default

    Don't jump to conclusions, just call them. I think you'll be fine.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS T/W 11R 205 heads, 232°-244° duration/.623" lift/114° LSA camshaft, 12:1 C/R, TFS R-Series FTI ported intake, BBK 80mm T/B, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 200A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, -6AN fuel system plumbing, Walbro 255 LPH pump, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, B&M Hammer shifter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us