Results 1 to 2 of 2

Thread: What should I choose?

  1. #1
    Join Date
    Jun 2015
    Posts
    1

    Default What should I choose?

    Can someone suggest what Holley EFI components would be suitable for my combination. I have a 540 BBC with a pair of 76mm turbos. This is going in a street/strip car. With a blow-through carburetor deal I was able to run premium pump fuel and 12 psi boost. I'd like do this with EFI. I'd like to go to a Coil-On-Plug deal to eliminate the distributor. I do not need any transmission control. What's needed to make an older school engine Coil-On-Plug?

  2. #2
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    23,415

    Default

    https://forums.holley.com/showthread...-Dominator-EFI (BBC Related Forum Thread)
    http://forums.holley.com/showthread....SI-Equivalents (MAP kPa to Boost PSI Equivalents & Boost Control Information)

    Originally Posted by Danny Cabral
    If you already have or you're purchasing a new Holley EFI non-LSx main harness:
    The Holley 558-307 CNP main harness is for Holley's Coil-On-Plug smart coils and LSx ignition coils (nine terminated loose wires into J1B).
    If using Holley's 556-112 CNP coils, the Holley 558-318 CNP coil sub-harness is also required (or the Holley 556-128 CNP Big Wire V8 Kit).
    For LSx coils, Holley 558-307 CNP main harness plugs into two GM 12579355 CNP sub-harnesses or Holley 558-321 LSx coil sub-harnesses.
    If you had a Holley EFI LSx main harness, you wouldn't need the Holley 558-307 CNP main harness or the 558-318 CNP coil sub-harness.
    https://www.holley.com/products/igni...nd_components/ (Holley EFI Coil-Near-Plug Ignition Components)
    https://www.holley.com/products/igni.../parts/556-128 (Holley EFI 556-128 Coil-Near-Plug Big Wire V8 Kit)
    https://www.holley.com/products/fuel.../parts/558-117 (Holley EFI 558-117 Universal MPFI Coil-Near-Plug Main Harness)
    https://www.holley.com/products/fuel.../parts/558-118 (Holley EFI 558-118 Ford Universal MPFI Coil-Near-Plug Main Harness)
    https://forums.holley.com/showthread...3038#post33038 (Detailed Crank Trigger & CNP/DIS Conversion Information & Reasoning)

    Most people find this document very helpful:
    http://documents.holley.com/efi_sele...chart62914.pdf (Holley HP & Dominator EFI Component Selection Guide)
    With the Dominator EFI, everything is sold separately. Use Summit Racing's shopping cart for a total price.
    The HP ECU only has four Inputs & four Outputs. If you need more than that, you'll need the Dominator ECU:
    http://documents.holley.com/techlibr...useanddiff.pdf (Holley HP & Dominator ECU Differences)

    EFI Software Help Information/Instructions:
    ‒ On the top Toolbar, click "Help" & "Contents". This opens all Help topics.
    ‒ When navigating the software, click "Help ?", drag it to any parameter and click again.
    ..This automatically opens the definitions for that specific parameter.
    ‒ Tuning information can be read by clicking the F1 key, when you're viewing any screen.
    http://documents.holley.com/techlibrary_199r10544.pdf (Holley EFI Help/Instructions Overview)
    http://documents.holley.com/techlibr...r10546rev1.pdf (Holley EFI Quick Start Guide)
    http://documents.holley.com/techlibr...10555rev17.pdf (Holley EFI Wiring Manual & Diagrams)
    http://forums.holley.com/showthread....ents-Read-This! (Initial Checks & Adjustments - Read Steps #1-#6!)
    Open the Holley EFI software "Help" Contents ("Help" drop down menu), and read "Step-By-Step Beginners Tuning".
    Ensure the EFI software is set to run as an "Administrator" (right click for Properties/Advanced). Set it and forget it.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & MT 245/45R17 tires.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us