Page 2 of 2 FirstFirst 12
Results 11 to 20 of 20

Thread: Terminator X Max Mapping Input/Output

  1. #11

    Default

    Probably another dumb question. Is there anyway to easily convert a resistance to a voltage value? Or do 3-wire 5V based temp sensors exist? I've looked everywhere and I don't think there is really a way to do it easily. I hate to have to run analog gauges with the Terminator ECU.

  2. #12
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    23,690

    Default

    Quote Originally Posted by atlctsv View Post
    Is there anyway to easily convert a resistance to a voltage value?
    I'm not sure. Example: https://wiki.autosportlabs.com/RaceC...pes_of_Sensors

    Or do 3-wire 5V based temp sensors exist?
    I think so. Example: https://wiki.autosportlabs.com/RaceC...Active_Sensors
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 MT tires.

  3. #13

    Default

    Danny, I'll ask this here since it's a related question. If I create a 5V Input, but feed it 12V, will it hurt the ECU? This might be a question for Adam, LOL. Andrew
    IG @projectgattago

  4. #14
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    23,690

    Default

    I'm not sure, but I wouldn't do it. Supposedly, the I/O circuits have some built-in protection and require a 20 minute battery disconnect (or in some extreme cases an ECU firmware reflash) to reset them.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 MT tires.

  5. #15

    Default

    I wasn't going to try it until I get a definitive answer. With that said, I don't think calling Tech Support will help, because this is way above their pay grade. Andrew
    IG @projectgattago

  6. #16
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    23,690

    Default

    Why aren't you using the "+12V" or "20 Volt" Type Input?
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 MT tires.

  7. #17

    Default

    If a 20V option was available, that is what I would be doing, but it is not an option on Terminator X. I can't do a simple 12V input because then it will not be selectable in the other place where I need to use it. Andrew
    IG @projectgattago

  8. #18
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    23,690

    Default

    Oh sorry, that new Terminator X keeps getting me twisted with the regular Terminator.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 MT tires.

  9. #19

    Default

    For future reference, yes, I can run 12V to a 5V input. Andrew
    IG @projectgattago

  10. #20
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    23,690

    Default

    Thanks for the update.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 MT tires.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us