Results 1 to 6 of 6

Thread: Sniper with in-tank pump.

  1. #1

    Default Sniper with in-tank pump.

    I'm currently running a Sniper system with return line on a 427W in a 1964 Fairlane. The tank design is terrible for the external pump, so I went with the 12-305 Holley in-tank pump that regulates fuel pressure with a recirc valve on the sending unit. Question is, do I still need the return line off the throttle body. Or can I cap it off and do away with the return line? The tank design sucks for trying to get the bulkhead fitting tight and it keeps leaking gas everytime I fill the tank.

  2. #2

    Default

    From Holley's website: https://www.holley.com/products/fuel...s/parts/12-305
    "Fuel pressure is internally regulated to 58 psi eliminating the added expense and effort of purchasing and installing an external fuel pressure regulator - no separate return line is required because this module returns excess fuel right inside the tank!"

  3. #3

    Default

    Well that's what I thought, just making sure it's gonna work alright before I commit. Gonna buy a new gas tank without the bulkhead hole in it to make this stupid thing stop leaking.

  4. #4

    Default

    I'm doing the same install into a '67 Camaro with the Holley in-tank pump. I'm assuming a -6AN cap to block off the return port on the Sniper.

  5. #5

    Default

    I ran a single line on my car, you just cap the return fitting on the Sniper unit. It is -6AN.

  6. #6
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    23,395

    Default

    There's three fuel inlet options and one fuel return fitting. See "Fuel Fitting Overview" on page 10: http://documents.holley.com/199r11031r.pdf (Holley Sniper EFI Instruction Manual)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us