Results 1 to 5 of 5

Thread: Chevy K30 wrecker need help with tuning Config File & datalog.

  1. #1

    Default Chevy K30 wrecker need help with tuning Config File & datalog.

    Can someone look at this and help me? I'm having horrible MPG & AFR goes high WOT, and decel from WOT. I can send current Config File & datalogs.

  2. #2
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    23,403

    Default

    (Please don't type your posts like you're texting. It takes me a long time to edit it. At least use Spell Check before posting.)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  3. #3

    Default

    Sorry, trying my best. Can you look at this? I'm at the point where I want to go to a carb. I bought the truck with the Sniper. It's a SBC 350 in a 1979 K30 wrecker, 8400 lbs. How do I post datalog & Config File? I have them in a compressed zip folder.

  4. #4

    Default

    Have you done any debugging or investigative work at all? What do the spark plugs look like? Have you run a compression check? Looked for exhaust leaks? Double checked all of your wiring? Installed new spark plugs & wires?

  5. #5
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    23,403

    Default

    Originally Posted by Danny Cabral
    The Target Air/Fuel Ratio Table & Base Fuel/Timing Table (and MAP kPa & RPM axes/scales) should be configured using the Sniper EFI software:
    In the Sniper EFI software (LINK), Target Air/Fuel Ratio Table (Fuel ICF) & Base Timing Table (Spark ICF), select "2D Table" Type (not "Simple").
    The Target Air/Fuel Ratio Table & Base Timing Table can then be properly configured & tuned for any engine.
    https://www.holley.com/support/resou...Fuel_Injection (Sniper EFI Software & Holley 558-443 CAN/USB Dongle)
    https://forums.holley.com/showthread...679#post100679 (Sniper EFI Optional Comm/Data Cable Accessories)
    Originally Posted by Danny Cabral
    Is the Sniper EFI Learning? Is the ignition timing synchronized? Is the fuel pressure 58-60 psi (LINK)? IAC Position
    of about 5% at hot idle? Check for ignition misfires/RPM signal problems, exhaust leak upstream of WBO2 sensor,
    or if the WBO2 sensor (or other sensor) has failed and corrupted the Learn Table. Look at the Data Monitor/Gauges.
    Also, the Holley Sniper EFI will intermittently inhibit Closed Loop at idle, if the AE vs TPS/MAP RoC Blanking values are set too low.
    http://documents.holley.com/techlibrary_199r11259.pdf (Holley Sniper EFI Help Manual)
    http://documents.holley.com/199r11369.pdf (Holley Sniper EFI Troubleshooting Guide)
    https://forums.holley.com/showthread...8356#post88356 (Holley Sniper EFI Fuel Pressure Tester/Gauge)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us