I'm wondering if I can run an MSD 6AL and an MSD 5462 universal timing control without magnetic pickup connector. So this MSD 5462 unit has only 6 wires:
Red - +12V.
Orange - Coil−.
Black - Ground.
White - Trigger wire.
Gray & Black are for the controller.
------------------
To run the MSD 6AL I use an MSD 8910 tach adapter and the MSD 6AL white trigger wire. Can I use the tach adapter 8910 with the MSD 5462 (spliced to the white trigger and red +12V), then run the MSD 5462 orange coil- to the MSD 6AL white trigger wire and the 6AL orange and black to the coil?