Results 1 to 4 of 4

Thread: Misfire at different RPM - wondering if MSD ignition box could be bad?

  1. #1

    Default Misfire at different RPM - wondering if MSD ignition box could be bad?

    Having problem with rough running and misfire. Distributor is new Pro Billet model 8546, new Blaster 2 coil and older 6AL box.
    If you swap the leads from the box to the distributor around, the car runs rough up to about 2000 RPM then smooths out.
    On the other hand, if they are reversed it runs smooth up to about 2500 RPM then starts to run rough.
    Plugs are also new Champions and plug wires are fairly new Taylor wires. Car is '67 GTX with mild 440. Thanks, Bill

  2. #2

    Default

    Where is the box grounded? And how is that coil mounted? (Laying on its side, at an angle, or straight up?) Also, have you measured OHMS on the magnetic pickup?
    shake-n-bake

  3. #3
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    23,052

    Default

    And sometimes a distributor's pickup coil intermittently fails the Ohms resistance test.
    Read page 2: https://documents.holley.com/techlibrary_pickups.pdf (MSD Magnetic Pickup Testing)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  4. #4

    Default

    Yes, exactly right.
    shake-n-bake

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us