Results 1 to 6 of 6

Thread: 4160 with 20-92 solenoid, which throttle return to use?

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default 4160 with 20-92 solenoid, which throttle return to use?

    This is probably a dumb question, but I think someone might have already come up with a nice & easy solution. I have a Ford 306 with a Holley 4160 600 cfm carburetor on it. I added factory original '65 A/C to the engine and found I needed to install the 20-92 solenoid to raise the engine idle RPM when the A/C runs at idle. This solenoid is large. It gets in the way where the throttle return spring is. I need to make something unless Holley has a solution (hope it doesn't cost another $100). Thanks

    Edit: I was able to use a longer spring that connects to the A/C compressor. It clears the solenoid
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	DSCN3566.jpg 
Views:	5 
Size:	100.9 KB 
ID:	8660  
    Last edited by 65clyclone; 09-11-2019 at 10:36 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us