Results 1 to 6 of 6

Thread: Terminator X On SBF

  1. #1

    Default Terminator X On SBF

    I'm looking into putting the Terminator X ECU on a 351 Windsor. Looks like in the EFI software, there's an option for 60-2 reluctor wheel and a Single Pulse cam sensor. Plan would be to use the Holley Hi-Ram intake that uses an LSx throttle body, and to use LSx Coil-On-Plug. Anything else that should stop this all from working?

  2. #2
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    22,973

    Default

    Yeah, those options should work fine. Are you using GM LSx or Holley EFI fuel injectors? Remember, the Terminator X EFI software is (currently) specifically designed for GM LSx components, so check every EFI software screen.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  3. #3

    Default

    I haven't bought anything yet. I want to make sure that it's possible before I start buying parts.

  4. #4
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    22,973

    Default

    Well, if you're doing something outside the realm of the Terminator X, contact Holley Tech Service (LINK) to be sure. Although investigating the Terminator X wiring schematic (LINK - scroll to end), installation manual (LINK) & EFI software (LINK) should answer most questions.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  5. #5

    Default

    Well now that Holley released the Terminator X for SBF, I don't have as much to figure out. I'd still like the use COP or CNP. Any ideas on how to do that since the SBF uses a distributor or Dual Sync?

  6. #6
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    22,973

    Default

    Coil-Near-Plug ignition is implemented the same way it is with the Holley HP, Terminator & Dominator ECUs.
    EST A-H (Cylinders #1-#8) CNP Outputs on the J1B ECU connector (Page 28: LINK).
    Custom Ignition Parameters, Output Setup: DIS Coil-On-Plug. Click "F1" for more info.
    FYI: In the current V1.0.5 TX software, the only non-LSx Crank Sensor Type is "60-2".

    If you have a Holley EFI non-LSx main harness application:
    The Holley 558-307 CNP main harness is for Holley's Coil-On-Plug smart coils and LSx ignition coils (nine terminated loose wires into J1B).
    If using Holley's 556-112 CNP coils, the Holley 558-318 CNP coil sub-harness is also required (or the Holley 556-128 CNP Big Wire V8 Kit).
    For LSx coils, Holley 558-307 CNP main harness plugs into two GM 12579355 CNP sub-harnesses or Holley 558-321 LSx coil sub-harnesses.
    IF you had a Holley EFI LSx main harness, you wouldn't need the Holley 558-307 CNP main harness or the 558-318 CNP coil sub-harness.

    Originally Posted by Danny Cabral
    Ignition Timing Cylinder Sequence Verification
    Ensure the Firing Order is entered correctly in Ignition Parameters (System ICF).
    Before the initial start, disconnect the fuel injector harness and verify
    at least, the first four cylinders in the firing order using a timing light.
    If your cylinders are firing in 90° intervals BUT in the wrong sequence,
    the coil harness is connected wrong (at the ECU or at the coil packs).
    Hopefully you have a fully degreed balancer or at least markings every 90°:
    1st cylinder, in firing order, should fire at 0° (or 15° - add whatever your cranking timing is)
    2nd cylinder, in firing order, should fire at 270° (or 285° - cranking timing added)
    3rd cylinder, in firing order, should fire at 180° (or 195° - cranking timing added)
    4th cylinder, in firing order, should fire at 90° (or 105° - cranking timing added)
    5th cylinder, in firing order, should fire at 0° (or 15° - cranking timing added)
    6th cylinder, in firing order, should fire at 270° (or 285° - cranking timing added)
    7th cylinder, in firing order, should fire at 180° (or 195° - cranking timing added)
    8th cylinder, in firing order, should fire at 90° (or 105° - cranking timing added)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us