Results 1 to 4 of 4

Thread: Recovering too slow when returning to idle.

  1. #1

    Default Recovering too slow when returning to idle.

    Is there a way to program the Sniper to recover sooner or faster when the engine is revved up? As the RPM drops back to idle, the AFR stays lean too long, and the IAC comes in too late. This makes the engine idle drop well below my target of 700 before coming back up. Sometimes it will stall. I just downloaded the tuning software, but I'm a bit intimidated by it all.

  2. #2
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    23,099

    Default

    The Base Fuel Table probably needs to be tuned. Sometimes the Advanced Control in Closed Loop/Learn Parameters is too low.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  3. #3
    Join Date
    Nov 2014
    Location
    Ont. Canada
    Posts
    1,454

    Default

    Or the throttle shafts need to be opened a little. Or the RPM to enter idle mode is too low. You need to datalog the event to see what's happening.

  4. #4
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    23,099

    Default

    Originally Posted by Danny Cabral
    Quick Datalogger Information:
    Always provide data, not just symptoms. Is the AFR & ignition timing optimized? Overlay the datalog onto your Config File.
    Ensure the Target A/F Ratio table is properly programmed for your engine. Ensure the ECU is "Learning" (Learn Table LINK).
    Scroll through the datalog to the problem area. Then look exactly where this happens on the Base Fuel & Timing Tables. Scrutinize:
    RPM, MAP, MAT, TPS, CTS, IAC, Target AFR, AFR Left, CL Comp, Ignition Timing, Duty Cycle, Fuel Flow, Fuel Pressure & Battery.

    Using the Holley Sniper EFI software (LINK), look at where the live cursor moves to during this occurrence, and
    manually tune that area of the Base Fuel Table (enrich or lean) & Base Timing Table (optimize ignition timing).


    I find the most helpful datalog function, is overlaying the datalog on your Config File.
    I'm in the habit of using the datalog Overlay feature every time I review a datalog.
    Click on "Datalog" (on the top Toolbar), "Activate Overlay", then "Open Data Log".
    You can literally "playback" a recorded event, and watch it as it happened on any screen.
    Minimize (shrink) the datalog window, and move it to the bottom of any Config File screen.
    Then click & scroll anywhere on the datalog, and watch it playback on your Config File (EFI software).
    http://documents.holley.com/techlibr...9r10543rev.pdf (Holley EFI Datalogger Instructions)
    https://forums.holley.com/showthread...s-amp-Datalogs (Datalog Information - Read "NOTES")
    https://www.youtube.com/watch?v=iqHO...C6FEA0BB99AF17 (How To Record & Email A Datalog)
    https://forums.holley.com/showthread...7531#post77531 (Closed Loop Datalog Tuning - Posts #2, #4 & #6)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us