Results 1 to 4 of 4

Thread: New Sniper EFI setup, start & idles, but dies when throttle is touched.

  1. #1

    Default New Sniper EFI setup, start & idles, but dies when throttle is touched.

    Hey Holley People. I hope some one can help me here. I just purchased a Holley Sniper EFI HO550-510.
    Holden HDT (GM) 308 V8 - M21 4 speed manual, slight head work & cam, nothing crazy. 3:55 diff gears.

    Installed everything, checked & double checked everything. Ran the Wizard and it started perfectly. Did the post start checks and idle adjustments. Then when I went to take it for a drive or to start the driving process, as soon as I start to accelerated, it starts to freak out and then dies and won't restart. Similar to if it was flooded, but looking down the intake, it doesn’t look flooded. This happened yesterday, so I upgraded the firmware last night. The plugs were fouled, but I'm unsure if that was from the Sniper or from my QuadraJet. I'm picking up some new plugs this afternoon. Any advice on why it could be stalling as soon as I touch the throttle? Any Help appreciated. Andrew

  2. #2
    Join Date
    Jan 2010
    Location
    Brisbane, Australia
    Posts
    1,640

    Default

    Email sent to you Andrew. Gary
    Regards, Gary

  3. #3

    Default

    Hard to say without knowing more information. Start a datalog before you fire up the engine so you can capture the full event. Watch your handheld screen as you rev the engine and see what it says. You obviously have some sort of issue, but you'll have to narrow it down before anyone can help you.

  4. #4

    Default

    First thing to check for is EMI. EMI makes the ECU flip out.
    69 Camaro
    400 SBC, ProCharger D1SC
    1.302 60', 5.95@116.4 on pump gas

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us