Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: Getting Dome Pressure close to Boost Pressure.

  1. #11

    Default

    Cool, I believe I can use the same button/input. I pulled the data from the last pass the other day. It was only at 14 lbs of boost with commanded 25 psi on the dome. The engine can handle over 30 lbs of boost, so I still have some room to go.

  2. #12

    Default

    I'm trying to set it up to use the bump in button to activate boost scramble using the same input. For some reason it won't let me drag it in, can you enlighten me if it's possible to use the bump in button to activate boost scramble?

  3. #13
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    22,988

    Default

    If you can't drag & drop (combine) it into the input, it either isn't allowed or it's not the same type of input (+12V, 20V, 5V, Ground, etc.).
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  4. #14

    Default

    Don't think that's the case. The bump in for the transbrake is assigned a 20V and so is the scramble, neither one will drop in:
    Click image for larger version. 

Name:	scramble.jpg 
Views:	5 
Size:	27.2 KB 
ID:	8540 Click image for larger version. 

Name:	scramble1.jpg 
Views:	3 
Size:	25.3 KB 
ID:	8541
    Could it be because I have the bump in tied into the transbrake like so?
    Click image for larger version. 

Name:	scramble2.jpg 
Views:	5 
Size:	25.3 KB 
ID:	8542
    I assume I could just run another input and assign it from the button, since the bump in button does nothing to I assume to the transbrake if it's not activated. What will it do when im hitting the bump in button while on the tbrake? I assume send it into scramble mode? F-it, ill just add another wireless button.
    Last edited by 427LSX; 08-08-2019 at 01:53 PM.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us