Getting Dome Pressure close to Boost Pressure.

[427LSX]

Cool, I believe I can use the same button/input. I pulled the data from the last pass the other day. It was only at 14 lbs of boost with commanded 25 psi on the dome. The engine can handle over 30 lbs of boost, so I still have some room to go.

[427LSX]

I'm trying to set it up to use the bump in button to activate boost scramble using the same input. For some reason it won't let me drag it in, can you enlighten me if it's possible to use the bump in button to activate boost scramble?

[Danny Cabral]

If you can't drag & drop (combine) it into the input, it either isn't allowed or it's not the same type of input (+12V, 20V, 5V, Ground, etc.).

[427LSX]

Don't think that's the case. The bump in for the transbrake is assigned a 20V and so is the scramble, neither one will drop in:

Could it be because I have the bump in tied into the transbrake like so?

I assume I could just run another input and assign it from the button, since the bump in button does nothing to I assume to the transbrake if it's not activated. What will it do when im hitting the bump in button while on the tbrake? I assume send it into scramble mode? F-it, ill just add another wireless button.